Logia LOMC001, Руководство пользователя

Страница: 6 / 10

10 11
• The error message “EE A” will be displayed.
6. Automatic Self-Check
A self-diagnostic process the unit undergoes automatically upon startup.
• Ensures parts are working properly for an accurate count.
7. Automatic Zero Clearing
When counting a new batch of bills, the unit will automatically start at zero.
8. Counterfeit Alarm
If the machine detects a counterfeit bill during counting, it will stop and beep.
• An error message will be displayed (EE1, EE2 or EE3) based on whether the counterfeit bill was
detected with Ultraviolet, Magnetic, or Infrared.
• The counterfeit bill will be the last one in the Stacking Tray.
• To continue counting, remove the counterfeit bill and press the Reset button.
9. Ultraviolet Detection
The Ultraviolet Detection function turns on automatically when the machine is powered on.
• To select and deselect this function, press the UV button.
10. Magnetic Detection
The Magnetic Detection function turns on automatically when the machine is powered on.
• To select and deselect this function, press the MG button.
11. Infrared Detection
The Infrared Detection function turns on automatically when the machine is powered on.
• To select and deselect this function, press the IR button.
12. Optional External Display
Allows you to have more than one person view the count.
• To use this, plug the Display cord into the port in the main unit.
ALARMS AND ERROR MESSAGES
Number Problem Solution
EE 1 Questionable currency detected by UV Remove the questionable bill and press the
Reset button
EE 2 Questionable currency detected by MG Remove the questionable bill and press the
Reset button
EE 3 Questionable currency detected by IR Remove the questionable bill and press the
Reset button
EE 4 • Half Note detected
• Left Counting Sensor is dirty or
malfunctioning
• Remove the questionable bill and press
the Reset button
• Clean sensor with included brush
EE 5 Inaccurate counting Tighten adjustment screw in a clockwise
direction
EE 6 Questionable currency detected by MG,
magnetic strip in non-standard location
Remove the questionable bill and press the
Reset button
EE 7 Slanting currency detected Remove the questionable bill and press the
Reset button
EE 8 Length of currency does not match
acceptable parameters
Remove the questionable bill and press the
Reset button
EE 9 Width of currency does not match
acceptable parameters
Remove the questionable bill and press the
Reset button
EE A Chain currency detected Remove the questionable bill and press the
Reset button