Compact Elite Mat Cutter
Instruction Manual
Model 350-1
6
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 LoganGraphic.com
To Re-parallel:
1. Release the Mat Guide.
2. Use a Phillips head screwdriver to loosen the four screws on either side of the black knobs
one turn.
3. Place a ruler or straight edge between the Mat Guide and the Guide Rail
(Fig. 18)
.
4. Slide the Mat Guide against the straight edge and the Guide Rail. Make sure both the Mat
Guide and the Guide Rail are making solid contact on both sides of the straight edge.
5. Re-tighten the Black Knobs first.
6. Then re-tighten the four screws. Do another parallel test to ensure that the Mat Guide is
now parallel.
Fig. 18
Straight
Edge
Mat Guide
#602 Slide
#603
Wedge
#604 Mat Guide
Screws (2)
#112N Mat
Guide Knob
Mat Guide Assembly
If mat guide wedge becomes unscrewed from mat guide, reassemble
making sure angle of wedge is aligned correctly
(Fig. 19)
.
Fig. 19
