LOFTNESS FS 800, Руководство пользователя и каталог запасных частей

Страница: 22 / 66

14 Fertilizer Spreader OM
Set-up Instructions
Spread Pattern Test
Before placing the fertilizer spreader into operation, a
spread pattern test must be performed. Differences in
product density and/or texture can vary a spread pattern,
therefore a test must performed each time a new material
is implemented. Certain variables must be controlled and
adjusted to ensure that there is uniform product coverage
and that the spreader is operating efficiently with optimal
performance.
Loftness is not responsible for costs or damages
caused by misapplication of fertilizers. It is the
responsibility of the operator to assure that the
fertilizer is applied uniformly and correctly over the
application area.
NOTE: A spread pattern test must also be performed
at the beginning of each season, and after
adjustments have been made.
Machine Preparation
Ensure the following items are completed before
performing the spread pattern test.
• Inspect, repair, or replace any components that are
damaged or not performing properly.
• Make all of the adjustments indicated in this manual.
• Ensure rear end and spinners are clear and free of
obstruction.
• Determine the weight per cubic foot of material to
be spread as accurately as possible using a density
scale. See Loftness part number N105370.
• Fill the hopper 40-50% of full capacity. There must
be enough product added to ensure the gate is
completely covered throughout the test.
• Set the machine for the appropriate PTO RPM.
Course Set-up
You will need:
• 17 identical collecting pans lined with dividers
• 3 flags
• 100 ft. of rope
• 17 cone-bottom vials with rack
• Funnel
NOTE: For a test pattern kit with these items, contact
your dealer.