LOFTNESS FertiLogix F1210, Руководство пользователя и каталог запасных частей

Страница: 46 / 92

38 12 Ton Spreader OM
Tightening/Loosening Apron (Cont’d)
L1230
Loosen the four nuts (1) on each side of the apron
securing the bearing plates (2). Eight nuts total.
Turn the FRONT jam nut (3) to either increase or decrease
apron tension. Ensure the sag in the apron clears the
frame by 1/2 in. to 1 in., and that the bearing shaft is
parallel with the front of the frame.
Retighten the eight nuts securing the bearing plates.
NOTE: If the apron is drifting, increase the tension on
the side the apron is drifting towards until it is
tracking on center.
Hitch Turnbuckle Adjustment (No-
Scale Models Only)
The hitch turnbuckles should be adjusted so the tires of
Maintenance
the spreader follow the track of the tractor.
Check every 250 hours, or annually, and adjust if
necessary.
Removing the Rear End
The rear end can be removed if repairs, replacement, or
reconditioning should ever be needed.
WARNING: Crushing hazard. The rear end
assembly is heavy. Use a hoist and strap
when lifting the assembly off of the frame.
Label and disconnect spinner hydraulic hoses at the rear
bulkhead of the chassis.
Disconnect the electrical spinner manifold connections
on the wiring harness.
Use the center-balance hole (1) provided in the rear end
assembly to attach the winch hook, or strap.
While rear end assembly is being supported by the hoist,
remove the four bolts securing the rear end to the frame.
Reverse procedure to return the rear end back to normal
operating position.