LOFTNESS 721D1HH, Руководство пользователя

Страница: 20 / 52

14 Hydraulic Snow Blower OM
Operating Instructions
Installing the Snow Blower to the
Loader (Cont’d)
Hydraulic Connection
NOTE: The hydraulic hose quick couplers shown above
are not supplied with the snow blower.
Before hooking up the hydraulic lines, clean the
connectors.
Install the snow blower quick couplers to the loader.
Electrical Connection
Connect the wiring harness to the loader's connector.
NOTE:
Depending on your model of skid loader, a pigtail
adapter (not included with the snow blower) may
be required to couple the snow blower's harness
to the skid loader's connector.
Blowing Snow
A definite pattern of operation is required to thoroughly
clean the snow area. The patterns shown in this section
should be used to avoid throwing snow in unwanted
places, as well as eliminating a second removal of snow.
The drawing above illustrates the removal of snow when
it is possible to throw the snow to the left and right, as
on a long driveway.
Start in the middle and work towards the opposite ends,
throwing the snow to both sides without changing the
direction of the discharge chute.
(Procedure continued on following page.)