LOFTNESS 721D1HH, Руководство пользователя

Страница: 13 / 52

7 Hydraulic Snow Blower OM
Safety Rules (Cont’d)
Operating Safety (Cont’d)
• Keep your feet on the pedals, (floor plates) seat belt
fastened snuggly and seat bar lowered, (if equipped),
when operating the attachment.
• Always use an approved roll bar and seat belt for
safe operation. Overturning a machine without a roll
bar and seat belt can result in injury or death.
• Operate the attachment only from the operator’s
seat.
• Before leaving the operator’s position for ANY reason
or allowing anyone to approach the machine and
attachment, always follow the mandatory shutdown
procedure.
• Keep hands and feet clear! Never step over or climb
over the attachment while the engine is running;
entanglement could occur.
• Disengage auxiliary hydraulics and place all machine
controls in neutral and engage the parking brake
before starting the engine.
• Remove from area of operation all foreign objects
such as bottles, rocks, wire, etc., that might become
tangled in the auger, causing damage to the machine
or be thrown, striking other objects.
• Stay alert for hidden hazards or traffic. Do not carry
passengers.
• Never operate the snow blower without good light
and visibility.
• Engage the hydraulic valve slowly at idle speed to
prevent unnecessary stress to driveline.
• Do not direct discharge spout towards people,
houses, vehicles, or other objects that could be
damaged.
• Never operate the snow blower in a lifted position.
Work only on the surface that the loader is standing
on.
• Do not operate the snow blower above the rated rpm.
• Always operate snow blower level with the ground
(front to rear).
Safety Instructions
• Always remove snow by traveling in an up and down
direction on slopes. To avoid loss of control and to
prevent overturn, never drive diagonally across the
slope.
• Reduce speed when turning.
• Never operate snow blower over 2 feet above the
ground.
• Do not operate on extremely steep slopes.
• After striking a foreign object, be sure to follow the
“Mandatory Shut-Down Procedure” on page 6.
Thoroughly inspect snow blower for any damage
before restarting and operating.
• Never attempt to make any adjustments while the
attachment is running or the key is in the “ON”
position in the machine. Before leaving the operator’s
position, disengage power to the attachment, shut
off engine and remove ignition key.
• Should excessive vibration occur, disengage
hydraulic valve immediately. Do not continue
operation of snow blower until the problem has
been detected and corrected. Be sure to follow the
“Mandatory Shut-Down Procedure” on page 6.
• Before servicing or adjusting the snow blower,
or removing material from it, be sure to follow the
“Mandatory Shut-Down Procedure” on page 6.
• Be sure the auger has stopped completely before
servicing.
• Disengage power to snow blower when transporting
or not in use.
• When transporting the snow blower on the road
at day or night, provide adequate warning to the
operators of other vehicles.
• Never park on a steep incline.
• Do not leave equipment in raised position.