LOFTNESS 43AXH, Руководство оператора

Страница: 19 / 42

Owner’s Manual (Timber Ax)
N14867 3 - January, 2004 3
Rotor Removal (Mower in Upside Down
Position) Continued:
6)
Remove the remaining (6) 5/8” bolts
and lock washers that hold the anti-wrap
to the inside of the side plate.
7) Repeat step 4, 5, and 6 on left hand side.
8)
Lift rotor out of machine.
9)
Slide anti-wrap plates off rotor shaft.
Remove spacers from right and left hand
ends of rotor shaft.
10) Reverse the above noted procedure
for installation.
Storage:
End of the Season:
•
Clean entire mower thoroughly.
•
Clean the belt and pulleys, relax the belt tension.
•
Lubricate all parts of the machine (see
lubrication, page 3-1 Section 3)
•
Make a list of all worn or damaged parts and
replace them.
•
Paint all parts that are worn or rusted.
•
Store mower in a clean, dry area.
•
Review your operator’s manual
Beginning of the Season:
•
Review your operator’s manual.
•
Lubricate all parts of the machine (see
lubrication, page 3-1 Section 3).
•
Tighten all bolts, nuts, and set screws.
•
Reapply tension to the belt so there is 1/2”
deflection at mid point between the pulleys.