33
Push the knob to confirm the program (at least 2 minutes) so the cooking can start. To
display the selected program push the knob quickly.
At the end of the cooking the “STOP” icon will flash and the alarm will beep. After 1
minute the alarm will be disabled, but the “STOP” icon will keep on flashing until the knob
is pushed.
To stop the program before the settled time, push the knob for 3 seconds: the program
will be deleted and the timer will return to the manual cooking set up.
START COOKING DIGITAL PROGRAMMER
Programming the start cooking time allows to automatically start and stop the cooking.
To program the start cooking time, briefly push the knob until the “START” icon flashes.
To increase or decrease the start cooking time, turn the knob clockwise or anticlockwise.
The flashing of the “START” icon continues for 10 seconds after the last setting.
If by this time the programming isn’t made, the function ends and the hands will return to
display the time.
If the knob is pressed the cooking start time is set (at least 1 minute) (the “START” icon is
lit on and steady). The next step is the setting of the end cooking time (the “STOP” icon
starts flashing).
To program the end cooking time follow the procedure below.
The two icons “START” and “STOP” will remain on to indicate successful programming.
TIMER PROGRAMMING
The timer programming allows to set a simple alarm at the end of a programmed time
without starting up the cooking.
To set an alarm, press briefly the knob three times until the icon “TIMER” stars flashing.
Then turn the knob, the timer programming is identical to the end cooking time program
(see the relevant paragraph)
The timer can be used only when there is no ongoing function.
DISPLAY OF THE SELECTED PROGRAM
To display the selected program briefly press the knob, at the same time the programmer
displays the program moving the hands on the selected time. The flashing of the relevant
icons indicates the different phases.
The programmer will then return automatically to display the current time and the
execution of the selected program.
DELETION OF THE SELECTED PROGRAM
To delete the selected program, push the knob for some seconds until you hear a beep
and the relevant icons are off.
The programmer will then return automatically to the manual cooking mode.
BLACKOUT SIGNAL
The timer does not cancel the program in case of blackout.
The timer signals any lack of power supply through the flashing of the “CLOCK” icon, in
order to verify that the time is set correctly.
In this case, to disable the alarm quickly press the knob.
