27
y
Warning: Ensure that the appliance is
switched off before replacing the lamp to avoid
the possibility of electric shock (see “Replacing
the light bulb”)
y
To clean the appliance, refer to the
corresponding chapter in this manual.
This instruction manual is also available on the
website www.lofra.it
1. INSTALLATION
Installation, regulation, transformation and maintenance procedures must be done by
qualified personnel in accordance to this manual and laws in force. The company will not
be liable for any type of damage derived from improper voltage or other misuse,
abnormal service or handling and alterations or modifications in design or construction..
This appliance has been designed to be fitted in a standard housing unit of about 600mm
in width. The housing unit and the adjacent furniture must be able of withstanding heat up
to 150° C. Additionally, make sure the adjacent furniture’s doors don’t interfere with the
oven.
WARNING
•
Check that the electrical system meets the requirements shown on the data plate of the
appliance.
1.1 CHOOSING A LOCATION FOR YOUR OVEN
The unit can be fitted either underneath a work surface or in a column unit.
Fitting measurements are shown in the pictures below..
Ovens door need to be fitted using 4 screws
Don’t lever against the oven door during the installation process.
