- 8
english
Adjusting the sound
Installation of the Dolby Digital Decoder extends the sound setting op-
tions. You now call the sound mode with the
L
button.
Setting the Sound mode
Call
Sound mode.
Select the number of speakers you want to hear by
pressing several times.
or:
34
Select the number of speakers you want to hear.
You can also enter the number of speakers with the
numeric buttons of the remote control.
Additional sound settings for volume adjustment and for Sound mode:
➠
As long as the volume bar or the speaker selection is
still visible in sound mode:
Call additional sound settings.
34
Select sound setting,
6
Go to the menu line below.
34
Make change.
Sound settings via the TV menu
➠
In normal TV mode, without other displays.
Call
TV menu
.
34
Select Sound
,
6
go to the menu line below.
34
Select desired sound setting,
6
Go to the menu line below.
34
Make change.
Explanations of the sound settings:
Select number of speakers you want to hear. The selection
depends on the connected sound components and on the
transmitted audio signal.
➠
If the number of speakers appears in brackets, the
sound of missing speakers is transmitted by the availa-
ble speakers (virtual).
The momentarily reproduced audio signal is output with
the ideal number of speakers.
Playback of center sound or mono (left/right).
Playback of front sound (L/R stereo).
Playback of front and center sound.
Playback of front and surround sound.
Playback of front, surround and center sound.
Play via an external HiFi amplifier. Selection is only
possible if an amplifier has been selected in the sound
components wizard.
Speech, Classical, Pop, Custom music, and Custom film
sound.
Adjust the headphones volume.
Proper boost of bass and treble tones at low volume.
Here you can make Dolby Pro Logic II sound settings for
movie, music, matrix and personal settings. The menu item
only appears with certain sound mode settings.
call with
OK
.
Selection possibility Mono/Stereo or Sound or Sound
2 for two-sound broadcasts separately for speakers and
headphones. Only available with analogue stations.
Reduces volume differences, e.g. for advertisements that
are too loud.
Sound selection for two-sound broadcasts.
Determining the maximum volume that can be set.
Specify the volume that is set when switching on the TV
set with the power switch. This does not affect switching
the set on from standby mode.
The volume can differ according to the individual stations.
If the sound is too loud or quiet in relation to other sta-
tions, adapt the volume. When the menu is open, you
can select the stations one after another with
P+/P–
and
adjust every single station conveniently.
Operation with Dolby Digital Decoder
Sound mode
optimal
1
2
3
4
5
Amplifier
Sound
adjustment
Headphone
volume
Loudness
Dolby PLII
mode
more ...
Sound
Speakers/
Headphones
Auto Volume
AV output
signal
Maximum
volume
Switch on
volume
Volume
adjustment for
current station
END
Sound adjustment
Volume
Sound mode
DPLII mode
24
Headphone volume
4
Sound mode ...
(5)
optimal
3
2
1
