29 -
English
The update starts and a message is displayed.
Update successful!
The code 345 has been successfully activated on key STB.
You can now disconnect the USB connector and close this program!
< Back
Finish
Loewe Assist Update
End the update program with
Finish
.
Reading out the STB code
You can read out the currently set STB code (in the following example code
“359”).
Press the
STB
button for at least 5 seconds.
The LED above the
STB
button flashes twice.
Enter code
002
.
The LED above the
STB
button flashes twice.
Press button 1 to determine the first (left) position of the
three-digit code. The LED flashes 3x for the number 3 for
example.
Press button 2 to determine the second (middle) position
of the three-digit code. The LED flashes 5x for the
number 5 for example.
Press button 3 to determine the third (right) position of
the three-digit code. The LED flashes 9x for the number
9 for example.
The LED does not flash for the number zero.
Internet update
_33153_Assist_STB_Buch_DE-SE.ind29 29
_33153_Assist_STB_Buch_DE-SE.ind29 29
23.01.2008 14:36:44
23.01.2008 14:36:44
