- 26
English
Setting operating mode
Setting the STB button
Brand list
The button with the STB function can be set to the desired device with a
3-digit number.
Press the
STB
button for at least 5 seconds.
The LED above the
STB
button flashes twice.
Enter code
003
.
The LED above the
STB
button flashes twice.
Enter the three-digit code from the Brand list of page
189.
Press the
On/Off
button until the device to be operated
reacts to the inputs on the remote control.
Press the
OK
button.
➠
When entering an invalid code the LED lights up for 2 seconds.
➠
The setting procedure is cancelled after 10 seconds without a code
input.
➠
In addition to the
STB
button you can also assign the
STB
function to
the
DVD
and
AUDIO
buttons (page 25).
➠
If you do not find a code with which you can operate your STB device
in this search, make the Internet Update (page 27).
Factory settings
The
STB/DVD/AUDIO
button can be reset to the factory settings.
Press the button for at least 5 seconds.
The LED above the button flashes twice.
Enter code
000
.
The LED above the button flashes twice.
_33153_Assist_STB_Buch_DE-SE.ind26 26
_33153_Assist_STB_Buch_DE-SE.ind26 26
23.01.2008 14:36:37
23.01.2008 14:36:37
