Loewe 57409.70, Руководство по эксплуатации

Страница: 41 / 46

45
English
Connecting a Pay-TV decoder
Call the „Station - Search and store“
menu:
Press briefly
MEN
▲
▼
Select „Search and store“ line
Select „Station“ line
▼
MEN
TV
MEN
End setting
X
To „Store“
➪
▼
or Select AV1/Dec or AV1/
Dec!
▲
Select „AV source“
Press
Video
Timer functions
Child lock
TV setup
GB F I E NL DK S
Information
Station
Auto programming
Change name
Sort
Search and store
▲
▼
M
Search and store
AV Source ---
▲
▼
Channel V/UHF O8
Frequency 196.25MHz
Fine
O
Storage 24
Name
TELE5
Norm Auto.-BG
Menu off TV
AV1
AV1!
AV1/Dec.
AV1/Dec.!
---
Connecting and setting Pay TV decoder
To set up and connect a Pay-TV decoder, e.g. for Premiere, please see the decoders
instructions for use.
Connect the connecting cable (AV/Scart cable) to the EURO-AV socket 1 on the back of
the TV set. The Pay-TV decoder can also display the subscription information (RGB signals)
through this socket.
Make sure that the decoder is switched on (green pilot lamp on the Premiere decoder)
and the decoder key is inserted.
Select the number of the program on the
TV set at which the Premiere station is
stored. If you can only see a coded picture,
proceed as follows.
1. Call the menu by pressing the
MEN
button.
2. Mark the Station line with the blue
button
▲
.
3. Select the Search and store line with
the yellow button ▼ .
4. Press the
MEN
button.
5. Mark the line AV source —- with the
blue button ▼ .
6. Select the line „AV1/Dec“ with the
yellow buttons
▼ ▲
if the Premiere
decoder applies a 12 V switching
voltage to the EURO-AV socket. For a
decoder without switching voltage,
select „AV1/Dec.!“.
7. Press the
MEN
key, Store is marked blue.
8. Store the settings by pressing the
X
button.
9. Clear the menu by pressing the
TV
button.
To record a Premiere program, connect
the video recorder to the 6-pole AV socket
of the Premiere decoder.
The settings are now stored for this
program place, even when you switch the
set off and back on with the on/off switch.
▼