Loewe 57409.70, Руководство по эксплуатации

Страница: 24 / 46

24
Picture format 4:3 or 16:9
The picture format of this TV set is 4:3. At
the moment most TV productions are
broadcast in this picture format. You
therefore normally set 4:3 so that the
picture is displayed over the whole screen.
Select the picture format
Press the Picture functions button
until
the line „4:3“ or „16:9“ is marked in white.
You can switch to format 4:3 or 16:9
picture format with the Contrast buttons
– +
.
Adjusting the colour
It is best to use peoples’ faces as a basis
for adjusting the colour.
Adjust the colour intensity with the Colour
button
–
+
.
Colour stronger: Press
+
button
Colour weaker: Press
–
button
Adjusting the colour on the set
Press the function button
three times.
<Colour> is marked in white on the
screen. The colour intensity can be
adjusted with the
+
or
–
button as
long as <Colour> is displayed on the
screen.
Daily operation of the set – picture format 4:3, 16:9, adjusting the colour
Picture format 4:3 or 16:9:
– +
Switch the picture format
Adjusting the colour:
– + with the remote control
On the set’s local control panel:
Adjusting the tint (for NTSCV norm
only):
+
–
Press function key three times
Colour stronger
Colour weaker
PhotoCD off
Peaking 3
Bright 33
Contrast 52
4:3
Colour 32
Press several times until a picture
format is displayed
If you want to play a rented cassette with
recordings in 16:9 format or 16:9
recordings from a camcorder, set the TV
set to this format. Video recorders which
emit a switching voltage of approx. 6 volts
when playing the 16:9 format switch over
to 16:9 automatically. The picture is then
reproduced with the correct geometry.
However, black bands appear at the top
and bottom of the picture.
Changing the colour tone: (only for NTSCV
norm)
The colour tone can only be changed if the
NTSC norm is set.
This fucntion can be used to adjust the
tinting slightly to red or blue.
Press the Colour functions button
until
<Tint> is marked in white.
Blue tint with
+
button, red tint
with
–
button.
– +
Adjust tint
Tint
Colour 32
Press until <Tint> is marked in white