Loewe 57409.70, Руководство по эксплуатации

Страница: 36 / 46

40
English
Connecting other equipment – videorecorders/camcorders
Audio/video playback through the EURO-AV sockets
Use a commercially available AV cable to connect your TV and video recorder. You can
play the video recorder or record a TV program through the EURO-AV socket. You can
basically use any program place for audio/video reproduction.
You can use any program slot for audio/video playback.
For example connect the video recorder to the EURO-AV 1 socket.
Select program slot for AV playback
through the EURO-AV socket:
MEN
➪
▲
Select „Station“
▼
MEN
➪
▼
Select „AV source“
▼
▲
Select „Search and store“
line
EURO-AV1
VHF/UHF
RGB
▲
▼
M
Search and store
AV Source ---
▲
▼
Channel V/UHF O8
Frequency 196.25MHz
Fine
O
Storage 24
Name
TELE5
Norm Auto.-BG
Menu off TV
AV1
AV1!
AV1/Dec.
AV1/Dec.!
---
Preparing the EURO-AV socket for AV-mode
1. Select the program slot at which you
want to set the AV function.
2. Call the „Station“ menu with the
MEN
button. The „Station“ line must be
marked in blue
▲
if necessary.
3. Select the „Search and store“ line with
the yellow button
▼
.
4. Press the
MEN
button briefly.
5. Select the „AV source ---“ line with the
blue button ▼ .
6. Select the AV-device (signal type) with
the yellow button ▼ or
▲
, e.g. AV1/
Dec (Decoder).
7. Select the line „Store“ with
▲
or
MEN
.
8. Store with
X
button.
9. End setup by pressing the
TV
button.
For setup:
• „AV1“, AV-playback through EURO-AV
socket 1 possible for units which emit a
switching voltage, e.g. video recorders.
• „AV1!“ AV playback possible through
socket 1 without switching voltage e.g.
camcorders.
• „AV1/Dec.“ AV playback with connection
of an SVHS recorder with connected Pay
TV decoder with switching voltage.
• „AV1/Dec.!“ AV reproduction on
connecting a Pay TV decoder without
switching voltage.
Whether the connected video
recorder or decoder supplies a switching
voltage during playback can be found out
from the operating manuals which
accompany this equipment.
The exclamation mark indicates that
this program place cannot be used for TV
but only for AV, i.e. as a monitor.
The video recorder outputs a
switching voltage if it is switched to
playback. You can now watch your
recordings instead of the TV.
End setup TV
X
➪
▲
Select "Storage“ line
or Select AV-device (signal
type) e.g. AV 1/Dec