Loepfe WeftMaster CUT-iT, Инструкция по эксплуатации

Страница: 23 / 28

Operation
WeftMaster CUT-iT
www.loepfe.com 23
4.4 Advanced functions
4.4.1 System settings
The following system settings can be displayed:
n
«Standby current»
n
«Run current»
n
«Boost current»
n
«Boost time»
n
«Internal values»
n
«Supply voltage»
n
«Output voltage»
n
«Set value of current source A»
n
«Actual output current of current source A»
n
«Set value of current source B»
n
«Actual output current of current source B»
n
«Output load resistance»
Displaying system settings
1. Press for 3 seconds.
ð
Display:
«Internal values»
the internal value (temperature) is displayed.
2. Press to display futher internal values.
ð
The further internal values are displayed.
3. Press any button.
ð
WeftMaster CUT-iT returns to
«Standby mode»
.