Loepfe WeftMaster CUT-iT, Инструкция по эксплуатации

Страница: 20 / 28

Operation
20 www.loepfe.com
WeftMaster CUT-iT
4.3.6 Select Program
Ten programs can be saved in system memory (program numbers 1–10).
n
Each program contains the values for the Standby and Run current strengths for the specified and
selected cutter wire type.
A new value must be defined when a cutter wire type is changed.
A program can only be selected when the weaving machine is idle.
ü
The weaving machine is idle.
1. Press.
2. Press to select the desired program.
3. Press to confirm the selected program.
ð
The selected program is active.
A program can only be selected when the weaving machine is idle.
ü
The weaving machine is running.
1. Press.
ð
The following error message is displayed: