REPAIR/REPLACEMENT POLICY
All XL Air Chain Hoists are thoroughly inspected and perfor-
mance tested prior to shipment. If any properly maintained
hoist develops a performance problem due to a material or
workmanship defect, as verified by factory, repair or
replacement of the unit will be made to the original pur-
chaser without charge. This repair/replacement policy
applies only to XL Hoists installed, maintained and operated
as outlined in this manual, and specifically excludes parts sub-
ject to normal wear, abuse, improper installation, improper
or inadequate maintenance, hostile environmental effects
and unauthorized repairs/modifications.
We reserve the right to change materials or design if, in our
opinion, such changes will improve our product. Abuse,
repair by an unauthorized person, or use of non-factory
replacement parts voids the guarantee and could lead to
dangerous operation. For full Terms of Sale, see Sales Order
Acknowledgement. Also, refer to the back cover for
Limitations of Warranties, Remedies and Damages, and
Indemnification and Safe Operation.
ACCESSORIES
HOOK SUSPENSIONS
Hook suspensions are available for suspending 2 through 6
ton hoist from a trolley with a single load bar or for sus-
pending the hoist from a fixed structure.
3
LUG SUSPENSIONS
Lug suspensions are required to suspend the XL Air Hoist
from plain, geared or motor driven trolleys described
below. When the hoist is to be suspended from a plain,
geared or motor driven trolley, the lug suspension is
attached to the hoist prior to shipment.
LUG SUSPENSION
PLAIN TROLLEYS
These are manual push type trolleys designed for use with
the XL Air Hoist. The trolley is adjustable to operate on a
range of American Standard ‘S’ beams and flat flanged
beams. The plain trolley is mounted on the hoist prior to
shipment.
PLAIN TROLLEY
GEARED TROLLEYS
The geared trolley is similar to the plain trolley except it is
moved by the means of a hand chain. The hand chain
rotates a pinion that drives gears attached to trolley
wheels and moves trolley along the beam. The geared trol-
ley is mounted on the hoist prior to shipment.
MOTOR DRIVEN TROLLEYS
The motor driven trolley is similar to the geared trolley
except the hand chain wheel is replaced with a gear
reducer and an air motor. The motor is controlled by a
bidirectional valve mounted to the motor and it is con-
trolled by levers located on the pendant control station.
A variable speed motor driven trolley is mounted on the
hoist prior to shipment.
2 ton
3-6 ton
HOOK SUSPENSION
