Lode OEM, Руководство по обслуживанию

Страница: 55 / 68

Service manual OEM treadmill V2.03 55
6.1 General Maintenance
Visual inspection:
•
Housing
•
Display
•
Cables, sockets e.g.line voltage entrance
•
User Interface, e.g. a keyboard
Mechanical check-up
•
Technical cleaning of mechanical parts
•
Freewheel assembly
•
Braking assembly, bearings
•
Saddle assembly/handle bar assembly
Inspection electronics
•
Primary and secundary electronic circuits
•
Options.
Software/Firmware
•
Software/Firmware revision and/or update
Calibration
•
Checking calibration dynamic
Safety test
•
We advise to do a safety test after repair and maintenance according to the IEC-
601-1-1, in some countries it is presubscribed by the government to do so.
Maintenance Sticker
•
Place a visible sticker on the housing with recommended date for maintenance.
ATTENTION
The walking belt and deck are self-lubricating. Never use any additional lubrication!\
The check up and/or technical maintenance must be carried out conform the procedure
described in this service manual. This may be done by your local dealer or another (by the
manufacturer) certified body. It is also recommended that a record of the service history is
kept for all activities relating to service and maintenance. In some countries this is even
obliged.
Maintenance and all repairs should only be carried out by an authorized agency. The
manufacturer will not be held responsible for the results of maintenance or repairs by
unauthorized persons.
Opening of the equipment by unauthorized agencies is not allowed and will terminate any
claim to warranty.