Lode OEM, Руководство по обслуживанию

Страница: 38 / 68

Service manual OEM treadmill V2.03 38
3.7 USB driver installation
When using the USB communication port on the treadmill the FTDI driver needs to be
installed. This driver will install a virtual COM port on your PC which emulates a standard
PC serial port such that the USB device may be communicated with as a standard RS2332
device.
On the CD that comes with the device the driver needed is located. The drivers can also be
downloaded from the website
http://www.ftdichip.com/FTDrivers.htm
Installing the FTDI driver
The installation of the FTDI driver goes as follows. Make sure the treadmill has not been
connected to the computer. Explore the CD and go to the driver directory. Execute the
CDM20600.exe file (CDMXXXX.exe in which the XXXX is the driver version) the file can
be recognised by the following icon:
A command window will be opened shortly
The driver has been installed. Plug in the USB cable between the computer and the treadmill
and the following message will appear, in which the COM port might be different depending
on the first available port.