Loctite 175, Руководство по эксплуатации, Страница: 4 / 14

2 Description
The Loctite
®
175 Hot Melt Dispenser contains a powerful 400W stainless steel
cartridge heater which, in conjunction with it’s adjustable solid-state electronic
controller, provides both a fast 5-minute warm-up, and accuracy in temperature
control to /- 10°F (5°C) of the set temperature. Temperature adjustment is
achieved by changing the plug-in module – the operator simply chooses the most
appropriate module for the adhesive formulation to be used.
The advanced electronic controller provides an Auto Standby feature, allowing the
tool to be left on for long periods of time without the adhesive overheating (however
care should still be taken with soft formulations). If left unused for a while the tool
will, after a variable time (depending on the ambient temperature), switch to its
power-saving standby-mode, reducing the temperature of the tool to approximately
270°F (130°C); it will return to it’s full operating temperature when operated.
Designed to comply with world wide safety standards, the Loctite
®
175 Hot Melt
Dispenser also features a totally enclosed heater housing, and is fitted with thermal
fuse protection.
3 Technical Data
Dimensions (L x H x W): approx. 12 1/4”x 9 5/8”x 2 11/16”
(approx. 312 x 245 x 70 mm)
Total weight: approx. 2.5 lbs. (1.15Kg)
Connection cable with main plug: 10 ft (3 m) long
Operating voltage: 98035: 110-120 VAC 50/60Hz
98055: 230 VAC 50/60Hz
Power consumption: 400W
Heating up time: 5 - 7 minutes
Operating temperature: approx. 392°F (200°C)
(dependent on Plug-in Module used)
Diameter of adhesive inlet: 1 11/16”(43 mm)
Extension cable: max. 65ft (20 m) long
Wire cross section: at least 16 a.w.g. (1.5 mm
2
)