Loctite 175, Руководство по эксплуатации, Страница: 3 / 14

1 Please Observe The Following
1.1 Emphasized Sections
Warning!
Refers to safety regulations and requires safety measures that protect the operator or
other persons from injury.
Caution!
Emphasizes what must be done or avoided so that the unit or other property is not
damaged.
Notice:
Provides recommendations for better handling of the unit during operation or
adjustment as well as for service activities.
1.2 Safety
Do not touch the nozzle or molten adhesive with bare skin as they are hot - the
operating temperature of the Loctite
®
175 Hot Melt Dispenser is
approximately 400ºF (200ºC). Protective gloves should always be worn.
Careless handling can cause skin burns. If molten adhesive comes into contact
with the skin immerse the affected area immediately in plenty of cold water.
Seek medical advice if necessary.
In addition to the safety instructions herein, any statutory regulations, local
fire insurance regulations, or other generally valid “regulations for accident
prevention”must be complied with when using this tool.

Never use the tool if it is damaged in any way.

Do not use this tool in damp rooms, outdoors while it is raining, or where
there is high humidity.

Do not use this tool in the vicinity of any heat-sensitive materials, or any
flammable materials, liquids, or gases.

Only use extension cables that meet the specification shown in “Technical
data”.

Never pull on the tool’s connecting cable.
1.3 Items supplied
Hot Melt Stick Dispenser
Plastic Stand
Manual
Plug –in Module 215°C