18
If you press ADVANCED button in upper right corner you will get access to advanced setup and info.
WAN IP Address configuration
section
DHCP
buttons
Default value:
On
(changeable)
Description:
enabling or disabling DHCP (Dynamic Host Configuration Protocol),
Renew
button will renew settings
when DHCP is enabled,
Refresh
button refresh data in IP, SUBNET, GATEWAY, DNS 1, DNS2 fields.
IP
field
Default value:
not defined
(changeable)
Description:
show IP (Internet Protocol) address.
SUBNET
field
Default value:
not defined
(changeable)
Description:
show logically visible subdivision of an IP network.
GATEWAY
field
Default value:
not defined
(changeable)
Description:
a node on a TCP/IP network that serves as an access point to another network.
DNS 1
&
DNS 2
fields
Default value:
not defined
(changeable)
Description:
server that hosts a network service for providing responses to queries against a directory service.
UPDATE STATIC CONFIG
button
Description:
update manually entered data (IP, SUBNET, GATEWAY, DNS 1, DNS2) when DHCP is set to off.
Traffic Info
section
Description:
show information about data traffic since Yacht Router is powered on for the last time.
DHCP
setup - you can turn it on/off,
Renew IP and Refresh data
WAN IP Address configuration
section
Trafic Info
section - data traffic info
ADVANCED
-open
WAN IP Address con-
figuration
and
Trafic Info
section
To check Mobile Network status and connectivity details click on gray field/button as specified on the following picture. You will
get following statuses:
PIN
,
Functionality
,
Current Operator
,
Signal Strength
and
Access Technology
.
Click here to get precise data about
mobile network and connectivity
status.
