Lockly MORTISE EDITION SECURE LUX PGD829AFUS, Руководство по установке

Страница: 14 / 20

When the security
bolt is retracted,
the flat shaft (M)
must be in vertical
position
Use nose pliers to bend
the cotter pin as shown
Remove and discard
positioning sleeve after
fixing the screw
V
(1X)
Q
R
L
N
M
P
STEP 5 . INSTALLING THE INTERIOR PANEL
PM5 X 12mm Screw(2X)
Cotter Pin(1X)
When the door thickness is greater than
70mm, insert the cotter pin through this hole.
When the door thickness is less than 70mm,
insert the cotter pin through this hole.
Remove and discard the positioning sleeve then insert both lock cables to the
corresponding socket of the interior panel. Insert the cotter pin to the flat shaft. See
notes as illustrated in the diagram. Then insert the flat shaft to the corresponding
holes and tighten with screws provided.
KM5 X 10mm Screw(1X)
Interior Panel(1X)
Battery Cover(1X)
Flat Shaft(1X)