Lockly MORTISE EDITION SECURE LUX PGD829AFUS, Руководство по установке

Страница: 11 / 20

Discard this end after cutting
Note: When the door thickness is less
than 70mm cut the Spindle from here.
Cut at this point when door thickness is
bigger than 40mm and less than 55mm.
Cut at this point when door thickness is
bigger than 55mm and less than 70mm.
Cut at this point when door thickness is
bigger than 70mm and less than 85mm
Cut at this point when door thickness is
bigger than 85mm and less than 100mm.
Note: If the door thickness is less
than 70mm cut screw for outer
panel to 23.5mm, that is, from
the 4th scale cut-off the end.
23.5
1 2 3 4
B
E
D
C
A
Exterior Panel(1X)
STEP 3. INSTALLING THE LOCK CYLINDER AND THE SPINDLE
Remove this plastic
cover before installing
the lock cylinder.
Lock cylinder
(1X)
PM4 X 10mm Screw(X2)
Spindle pad(X2)
Spindle(X2)
Make sure the lock cylinder is aligned with the door holes then fix it with 2 screws to the exterior
panel. Consequently fix the two spindles and the spindle pads as shown with pliers.