SECTION 3.1
9
3.1 Configuring Access
The Default Access Code is
NOTICE
1 2 3 4 5 6
Your new Lockly
Access Code
can be any combination of
6 to 8 digits.
Once a new Access Code is
entered, the
Default Access Code
of
123456
would be deleted. A maximum of 16 sets of Access Codes
can be stored for use at any given time. To add more than 16 sets of Access Codes, you must delete
an existing Access Code before adding a new code.
There are a total of
five (5) buttons
on the keypad as shown in the
example image to the left. The numbers in each button may differ
than what is shown on your device than what is displayed here.
To enter your required digit, just simply press the circle where your
number is shown. You do not need to press the actual number as
anywhere within the circle will suffice.
The button on the bottom is the
OK
button. You will be pressing
this button when you are done entering your
Access Code
.
OK Button
IMPORTANT:
Pairing your lock to your smart phone is required to manage your access
codes, fingerprints and RFID cards. To pair you lock, you need to download the Lockly
app and the Activation Code Card, then follow on-screen instructions.
There are different types of Access Codes that can be generated using the Lockly App. Each type of
access code have different levels of permission you can select for your guests, tenants, deliveries, helpers,
etc., Get the latest updates on access codes, visit: www.support.lockly.com/faq/accesscodes/
