Cylinder Adapter (x1)
Step 4
continued
9
INSTALLING THE LOCKSET
Insert cylinder adapter
E
make
sure the arrow (red mark)is at the
bottom as shown.
Once adapter is secured, remove
positioning clamp by pressing on
both sides.
Use positioning clamp to hold the
cylinder adapter in "+" position.
3
1
2
4
To check if the cylinder adapter is properly
installed, insert a phillips screwdriver. Turn
clockwise and counter clockwise to check
is the deadbolt and latch throw fully extend
and retract. You may need to adjust the
position if of the adapter if the deadbolt
and latch throw are not fully extending
and retracting.
E
