The arrows must be aligned or as closed as possible (less than 3/4"). If
needed, adjust the position of the sensor magnet using provided foam
pads to ensure the Lockly logo blinks red when door opens or closes.
IMPORTANT:
16
INSTALLING DOOR SENSORS
Step 8
continued
1
、
Peel off the paper layer of the
adhesives from the back of the wired
sensor.
3
、
Close the door. Before you peel off the paper layer of the adhesives from the sensor
magnet, align the arrow with the wired sensor. Install on to door frame.
2
、
Position the wired sensor to the edge of
the door, avoiding the door strike plate.
Attach and secure with the adhesives.
Peel off the paper layer
of the adhesives from the
back of the wired sensor.
peel off
Foam Pads
X
