PREPARING DOOR SENSOR FOR INSTALLATION
Step 8
15
Lockly Guard Athena comes with a pre-wired door sensors consisting of two parts:
Part (V) - Wired Sensor
Part (W) - Sensor Magnet
About door sensors
Door sensors provide real-time door condition status, such as the ability to verify if the door
is securely closed. It sends push notifications to your phone whenever your door opens.
Removal of Sensor (optional)
There may be circumstances where the sensor cannot be installed because of molding/door
limitations or is not aesthetically desirable. The sensor wired to the lock is removable by
carefully pulling its connector from the circuit board.
If removed, some features and
functionality will not be available, such as real-time condition status.
IMPORTANT: Gap must be less than 3/4” when installed.
When installed on door, the distance between the wired sensor
and sensor magnet must be less than 3/4” in order for the sensor
to work. If door frame is higher than door, add included foam
pads to level parts (V) and (W) with each other as much as
possible.
TIP:
Lockly Guard door sensors comes in Grey (PGA715) and Matte Black (PGA716)
that can be ordered through our customer hotline: +1 (855) 562-5599 or by
email: [email protected].
