background image

2

Hazard definitions

The following defined terms are used throughout this manual to bring attention to the presence of hazards of various risk levels
or to important information concerning the life of the product.

DANGER

WARNING

CAUTION

CAUTION

NOTICE

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.

NOTICE indicates special instructions on installation, operation, or maintenance that are important but not
related to personal injury or property damage.

CONTENTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hazard Definitions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PLEASE READ BEFORE PROCEEDING  . . . . . . . . . . . . 3
Handling Ceramic Fiber Materials  . . . . . . . . . . . . . . . . . . . 3

When servicing boiler . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Boiler operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Boiler water  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Freeze protection fluids  . . . . . . . . . . . . . . . . . . . . . . . . 4

WHAT IS IN THIS MANUAL  . . . . . . . . . . . . . . . . . . . . . . . 5

1.  SERVICE

Near Boiler Piping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
The Knight Wall Mount Display  . . . . . . . . . . . . . . . . . . . . . 7

Control Inputs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Control Outputs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
General Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Sequence of Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12 
Display Panel Menu Access  . . . . . . . . . . . . . . . . . . . . . . 13
Display Panel Parameter Access  . . . . . . . . . . . . . . . . . . 14
Parameter Table  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16
Viewable and Changeable Control Parameters  . . . . . . . 17-22   

2.  MAINTENANCE

Maintenance and Annual Startup  . . . . . . . . . . . . . . . . . . 23-27

3.  TROUBLESHOOTING

Before Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Check Control Module Fuses   . . . . . . . . . . . . . . . . . . . . . 28
Table 3A - Troubleshooting Chart - No Display  . . . . . . . . 29
Checking Temperature Sensors  . . . . . . . . . . . . . . . . . . . 30
Table 3E - Troubleshooting Chart - Noisy System  . . . . . 31
Table 3F - Troubleshooting Chart - Fault Messages  . . . . 32-39
Combustion Analysis Procedure  . . . . . . . . . . . . . . . . . . . 40
Table 3G - Troubleshooting Chart - Combustion Levels

40

Table 3H - Flue Products  . . . . . . . . . . . . . . . . . . . . . . . . . 40
Gas Valve Adjustment Procedure  . . . . . . . . . . . . . . . . . . 41
Revision Notes  . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Contents

Содержание KNIGHT 210













































Отзывы: