5
LCN-GT10D
Installation guide
Local Control Network
®
Connect the mounting frame
to the I-port and screw to the
flush mounted box.
Pull out the plastic slider
sideways at the rear side of
the key-sensor until it resists
(about 8mm), and insert the
LCN-GT10D at a slight angle
from the bottom towards the
m o u n t i n g f r a m e . A t t h e
bottom area, the LCN-GT10D
must be hooked into the
c o r n e r s o f t h e m o u n t i n g
frame and pressed towards
the wall.
T h r o u g h p u s h i n g i n t h e
plastic slider on the side, the
LCN-GT10D is locked firmly
onto the mounting frame.
Insert guiding pins at an
angle from the bottom
engage to the bottom
corners in a slanted
movement
press the LCN-GT4D
towards the wall, lock
slides on the side
3.
1.
2.
