background image

3

ᴾᴾᾀᵌ

ᵠᶃᶄᶍᶐᶃᴾᶑᶒᵿᶐᶒᶇᶌᶅᴾᶋᵿᶇᶌᶒᶃᶌᵿᶌᶁᶃᴾᶍᶐᴾᶂᶇᶑᵿᶑᶑᶃᶋᶀᶊᶇᶌᶅᴾᶒᶆᶃᴾᶓᶌᶇᶒᴾᶒᶍᴾᶐᶃᶎᶊᵿᶁᶃᴾᶎᵿᶐᶒᶑᵊᴾᶀᶃᴾᶑᶓᶐᶃᴾᶒᶍᴾᶑᶒᶍᶎ

ᴾᴾᴾᴾᴾᴾ

ᵿᶇᶐᴾᶑᶓᶎᶎᶊᶗᵌ

ẅᴾ

㻌㻌㻌䞉

Performing maintenance or disassembly with air supplied may cause a part to jump out, oil to

      squirt out, or the unit to perform unexpectedly, and may result in an accident or personal injury. 

ᴾᴾᾁᵌ

ᵲᶇᶅᶆᶒᶃᶌᴾᶒᶆᶃᴾᵠᶊᶃᶃᶂᴾᵮᶊᶓᶅᴾᶄᶇᶐᶋᶊᶗᴾᶀᶃᶄᶍᶐᶃᴾᶓᶑᶃᵌ

ẅᴾ

㻌㻌㻌䞉

If the bleed Plug is loose or coming off  during use, oil may squirt out resulting in an accident or

      personal injury.

ᴾᴾᾂᵌ

ᵢᶍᴾᶌᶍᶒᴾᶍᶎᶃᶐᵿᶒᶃᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶕᶇᶒᶆᶍᶓᶒᴾᶃᶏᶓᶇᶎᶎᶃᶂᴾᶒᶆᶃᴾᶄᶐᵿᶋᶃᴾᶆᶃᵿᶂᵌ

ẅᴾ

㻌㻌㻌䞉

Items such as fi ngers or a hand may become caught in the mechanism.

ᴾᴾᾃᵌ

ᵢᶍᴾᶌᶍᶒᴾᶀᶐᶇᶌᶅᴾᶗᶍᶓᶐᴾᶄᵿᶁᶃᴾᶁᶊᶍᶑᶃᴾᶒᶍᴾᶒᶆᶃᴾᵿᶇᶐᴾᶍᶓᶒᶊᶃᶒᴾᶆᶍᶊᶃᶑᵌ

ẅᴾ

㻌㻌㻌䞉

Pressurized air containing fi ne particles is discharged from the air outlet holes during use.

      Keep eyes away from this area.

ᴾᴾᾄᵌ

ᵟᶔᶍᶇᶂᴾᶑᶉᶇᶌᴾᶁᶍᶌᶒᵿᶁᶒᴾᶕᶇᶒᶆᴾᶑᶓᶀᶑᶒᵿᶌᶁᶃᶑᴾᶑᶓᶁᶆᴾᵿᶑᴾᶆᶗᶂᶐᵿᶓᶊᶇᶁᴾᶍᶇᶊᵊᴾᶊᶓᶀᶐᶇᶁᵿᶒᶇᶌᶅᴾᶍᶇᶊᴾᵿᶌᶂᴾᶅᶐᶃᵿᶑᶃᵌ

ᴾẅᴾ

㻌㻌㻌䞉

Such substances may cause inflammation of the skin. If they come into contact with your skin,

     wash the aff ected area thoroughly.

ᴾᴾᾅᵌ

ᵲᶆᶃᴾᶎᵿᶐᶒᶑᴾᶒᶍᴾᶀᶃᴾᶓᶑᶃᶂᴾᶋᶓᶑᶒᴾᶀᶃᴾᶒᶆᶍᶑᶃᴾᶑᶓᶎᶎᶊᶇᶃᶂᴾᶄᶐᶍᶋᴾᵪᶍᶀᶒᶃᶖᴾᶍᶐᴾᶐᶃᶁᶍᶋᶋᶃᶌᶂᶃᶂᴾᶀᶗᴾᵪᶍᶀᶒᶃᶖᵌ

ẅẅᴾᴾ

ᵱᶃᶊᶃᶁᶒᴾᵿᶌᶂᴾᵿᶒᶒᵿᶁᶆᴾᶎᵿᶐᶒᶑᴾᵿᶎᶎᶊᶇᶁᵿᶀᶊᶃᴾᶒᶍᴾᶗᶍᶓᶐᴾᶐᶇᶔᶃᶒᵌ

ẅᴾ

㻌㻌㻌䞉

Otherwise the unit may not produce maximum performance and may malfunction resulting in an

      accident or personal injury.

ᴾᴾᾆᵌ

ᵫᵿᶉᶃᴾᶑᶓᶐᶃᴾᶒᶆᵿᶒᴾᶒᶆᶃᴾᶕᶍᶐᶉᶎᶊᵿᶁᶃᴾᶇᶑᴾᶑᵿᶄᶃᵊᴾᶁᶊᶃᵿᶌᴾᵿᶌᶂᴾᶍᶐᶅᵿᶌᶇᶘᶃᶂᵌ

ẅᴾ

㻌㻌㻌䞉

Accidents can easily occur in untidy workplaces.

㻌㻌㻌䞉

If the cut mandrels are allowed to fall onto the fl oor, you may slip on them, and injury may result.

ᴾᴾᾇᵌ

ᵟᶔᶍᶇᶂᴾᶓᶌᶁᶍᶋᶄᶍᶐᶒᵿᶀᶊᶃᴾᶎᶍᶑᶒᶓᶐᶃᶑᴾᶕᶆᶇᶊᶃᴾᶕᶍᶐᶉᶇᶌᶅᵌ

ẅẅᴾ

㻌㻌㻌䞉

You may fall down and injury may result.

ᴾᴾᾈᵌ

ᵩᶃᶃᶎᴾᶎᶃᶍᶎᶊᶃᴾᶕᶆᶍᴾᵿᶐᶃᴾᶌᶍᶒᴾᶇᶌᶔᶍᶊᶔᶃᶂᴾᶇᶌᴾᶕᶍᶐᶉᴾᵿᶕᵿᶗᴾᶄᶐᶍᶋᴾᶒᶆᶃᴾᶕᶍᶐᶉᶎᶊᵿᶁᶃᵌ

ẅẅᴾ

㻌㻌㻌䞉

Accidents or injury may result.

ᾀ὿ᵌ

ᵫᵿᶇᶌᶒᵿᶇᶌᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶕᶇᶒᶆᴾᶁᵿᶐᶃᵌ

ẅẅᴾ

㻌㻌㻌䞉

Refer to the Instruction Manual for details on replacing parts and attachments, otherwise injury

     may occur.

ᾀᾀᵌ

ᵩᶃᶃᶎᴾᶒᶆᶃᴾᶆᵿᶌᶂᴾᶅᶐᶇᶎᴾᶂᶐᶗᴾᵿᶌᶂᴾᶁᶊᶃᵿᶌᵊᴾᵿᶌᶂᴾᵿᶔᶍᶇᶂᴾᵿᶂᶆᶃᶑᶇᶍᶌᴾᶍᶄᴾᶍᶇᶊᴾᵿᶌᶂᴾᶅᶐᶃᵿᶑᶃᵌ

ẅẅᴾ

㻌㻌㻌䞉

Otherwise the grip may slip from your hand resulting in falling of the unit.

ᾀᾁᵌ

ᵢᶍᴾᶌᶍᶒᴾᶊᶃᵿᶔᶃᴾᶒᶆᶃᴾᶄᶊᶍᶍᶐᴾᶊᶇᶒᶒᶃᶐᶃᶂᴾᶕᶇᶒᶆᴾᶁᶓᶒᴾᶋᵿᶌᶂᶐᶃᶊᶑᵌ

ẅẅᴾ

㻌㻌㻌䞉

Cut mandrels are dangerous because their ends are sharp. Stepping on them is also dangerous

      easily causing a slip and fall accident.

ᾀᾂᵌ

ᵳᶑᶃᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶁᵿᶐᶃᶄᶓᶊᶊᶗᴾᵿᶌᶂᴾᶁᶍᶌᶁᶃᶌᶒᶐᵿᶒᶃᴾᶍᶌᴾᶁᶍᶐᶐᶃᶁᶒᴾᶍᶎᶃᶐᵿᶒᶇᶍᶌᴾᵿᶒᴾᵿᶊᶊᴾᶒᶇᶋᶃᶑᵌᴾ

㻌㻌㻌䞉

Use the tool with proper care, paying full attention to methods of handing and operation and

      surrounding conditions. Accidents and injury may result if this practice is not followed.

㻌㻌㻌䞉㻌

Use common sense at all times, otherwise accidents or injury may result. 

㻌㻌㻌䞉

When you are tired, do not use the tool, otherwise accidents or injury may result.

ᾀᾃᵌ

ᵟᶑᶉᴾᵪᶍᶀᶒᶃᶖᴾᶒᶍᴾᶁᵿᶐᶐᶗᴾᶍᶓᶒᴾᵿᶌᶗᴾᶐᶃᶎᵿᶇᶐᴾᶕᶍᶐᶉᴾᶐᶃᶏᶓᶇᶐᶃᶂᵌ

ẅᴾ

㻌㻌㻌䞉

Repair work should only be carried out by a qualified technician. Please contact your nearest

       “

LOBSTER

 distributor, representative, or direct to Lobtex Co.,Ltd.,Osaka. If the tool is repaired

      by someone without the necessary qualifications and experience, the tool may not perform to
      optimum standards, and accidents or injury may result.

ᾀᾄᵌ

ᵢᶍᴾᶌᶍᶒᴾᵿᶒᶒᶃᶋᶎᶒᴾᶒᶍᴾᶋᶍᶂᶇᶄᶗᴾᶒᶆᶃᴾᶒᶍᶍᶊᵌ

ẅẅᴾ

㻌㻌㻌䞉

Unauthorized modifications may cause malfunctions which can lead to accidents or injury.

ᾀᾅᵌ

ᵵᶆᶃᶌᴾᶂᶇᶑᶎᶍᶑᶇᶌᶅᴾᶍᶄᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶍᶐᴾᶎᵿᶁᶉᶇᶌᶅᴾᶋᵿᶒᶃᶐᶇᵿᶊᶑᵊᴾᶍᶀᶑᶃᶐᶔᶃᴾᶊᶍᶁᵿᶊᴾᶊᵿᶕᶑᴾᵿᶌᶂᴾᶁᶍᶂᶃᶑᴾᶍᶌᴾᶕᵿᶑᶒᶃ

ᴾᴾᴾᴾᴾᴾ

ᶂᶇᶑᶎᶍᶑᵿᶊᵌ

ẅẅᴾ

ᾀᾆᵌ

ᵢᶍᴾᶌᶍᶒᴾᶐᶃᶋᶍᶔᶃᴾᶐᶓᶀᶀᶃᶐᴾᶀᶃᶊᶊᶍᶕᶑᴾᵿᶒᴾᶑᶕᶇᶔᶃᶊᴾᶈᶍᶇᶌᶒᴾᶇᶌᴾᶒᶆᶃᴾᶃᶌᶂᴾᶍᶄᴾᶍᶇᶊᴾᶎᶐᶃᶑᶑᶓᶐᶃᴾᶆᶍᶑᶃᵌ

ẅᴾ

㻌㻌㻌䞉

Otherwise, your fi nger or a hand may be pinched.

ᒍᛖ὾ᾔ

ᾛᾘ

ᵡᵟᵳᵲᵧᵭᵬ

Содержание Lobster ARV-025M























Отзывы: