LNS FOX WS 2 1020, Инструкция по установке и эксплуатации

Страница: 34 / 58

4-12 CHAPTER 4: INSTALLATION AND USE
SERIES WS 2- F190054000
i) Trap for tube submerged in container liquid
Trap initiation
- After having created the trap, release the two front latches and lift the top part of the purifier.
- Use a suitable container to remove about 200-300 cc of coolant liquid (oil or emulsion) from the
coolant tank.
- Pour the coolant inside the lower part of the purifier in the drainage hole area, in order to preload the
drainage trap and allow the re-condensed liquids to be discharged from the first phases the purifier is
used.
- Lower the top part and secure the latches.
- After a few seconds, the oil coming out of the drainage tube indicates that the drainage trap has
been properly preloaded.
j)
Release the latches and lift the
top part of the extractor fan k)
Pour 200-300 cc oil in the
drainage hole area l)
Make sure that oil comes out of
the drainage tube after a few
seconds
Warning: Do NOT use the purifier without a trap on the drainage tube!!
The absence of a trap on the drainage and relative preloading operation prevents re-
condensed liquids from being discharged while the purifier operates.
The normal product life of filters could be seriously jeopardised by continuous use of the
purifier without a drainage trap.
If an emulsion is used, to avoid trap clogging, we recommend you empty the trap and tube
once or twice a year or during purifier maintenance.