LNS Express 220 S2, Инструкция по эксплуатации

Страница: 10 / 119

CHAPTER 1: BASIC PRINCIPLES 7
EXPRESS 220 S2/320 S2
4. SAFETY DEVICES
The EXPRESS 220 S2 bar feed system has been designed with a focus on maximum safety during its
handling and complies with all EC requirements.
Safety covers and devices make access to the moving parts of the bar feeder impossible. Safety switches
keep the bar feeder from operating when these protections are open. The design of switches, and their
integration on the bar feeder, makes their exclusion almost impossible.
By pressing the emergency stop button located on the remote control, the functions of the bar feeder and
the lathe are immediately stopped.
The LNS Company, or its local representative, may not be held responsible for possible
accidents or property damage, whether caused directly or not, by any means whatsoever,
if certain safety devices have not been included.
4.1. Safety analysis for a correct incorporation
Before considering assembling the machine, it is necessary to consider the following points:
·
Consider safety strategies that reduce risks to an acceptable level;
·
Define the tasks required for applications to predict and assess the need of access and / or for
the approach;
·
Identify sources of risks, including failures and failure modes associated with each task. Risks
can come from:
o
machine in which the device EXPRESS 220 S2 is integrated;
o
its association with other equipment,
o
People
’s interaction with the machine.
·
Evaluate and assess the risks associated by using the machine EXPRESS 220 S2:
o
programming risks
o
operation risks
o
risks of use
o
maintenance risks
·
Choose methods of protection :
o
the use of protective devices
o
the introduction of signals
o
compliance with safe work procedures