LNR LD5 DSP-SDR, Краткое руководство пользователя, Страница: 9 / 18

© 2014 LNR Precision Par EndFedz Antennas and QRP Transceivers
MENU Settings
Enter MENU MODE by pressing MENU button and exit the menu mode by pressing the MENU again after set up.
Most of the functions, related to receiving or transmitting, can be changed by values and monitored via monitor in real time.
MENU Default menu settings
AGC AGC speed from 1-20. 1 is the slowest and 20 the fastest
PITCH CW Sidetone and CW offset pitch. Changes take effect when you exit Menu mode
CW SPEED 5 to 60 WPM. Speed change takes effect when you exit Menu mode.
WEIGHT CW KEY Adjusts the ratio of dash length to dot length:
2> 1; 2.5> 1; 3> 1; 3.5> 1; 4> 1; 4.5> 1 3:1 is standard
CW VOX Controls break in delay. Steps in 100mSec from 100mSec to 5 seconds
REVERSE CW KEY Change which side of the paddle is dot and which side is dash.
CW KEY TYPE Two options: SIMPLE= hand key. AUTO= Paddle.
IAMBIC MODE Allows user to switch from Iambic mode A to Iambic mode B
NOTCH FILTER Adjusts notch depth from -6 dB to -40dB Changes can be observed while in Menu mode.
NOISE BLANKER Adjustable using tuning knob from 4 to 12. 4 is maximum blanking, 12 is minimum. Changes can be heard while in Menu mode.
NOISE REDUCTION
Menu range from 1 to 100 with 1 being the least. If NR is activated from the front panel (F + NR) you can observe the effect
within the Menu.
S-METER MODE Two modes: Bar Graph or readout in uV.
TX METER Two options: Bar Graph (Scaler) or Watts (Number)
SHOW TX Two options: Power in Watts or VSWR
POWER TX Adjusts power out. Settings from 10 to 100. Typically, a 10 setting is 1W and a 100 setting is 5W
LED MODE
Two options: Forever= LCD backlight always on. Auto= backlight turns on for 3 seconds whenever a front panel switch or encoder
is activated. Backlight off saves 40mA of current drain.
SSB TX MUTE SSB TX Monitor. Two options: Enable and Disable
SSB COMPRESSOR SSB Mic compression from 1 to 100.
SSB VOX adjustment of VOX delay for SSB – DISABLE is off, Adjustable from 100mSec to 5 seconds in 100mSec steps
VOX LEVEL Adjusts VOX gain in SSB mode.
TX EQ 3 options: Accentuate the Lows, Highs or Midrange. LowF /HiF/ MediumF
GAIN TX DIG Setting from 1-9.8 using the VFO knob. This function controls the AF Gain in Digital mode
SQUELCH Settings 0-100. A 0 (zero) setting essentially turns squelch off.