LNR LD5 DSP-SDR, Краткое руководство пользователя, Страница: 17 / 18

© 2014 LNR Precision Par EndFedz Antennas and QRP Transceivers
SWR Protection
The radio has a built-in ALC SWR protection - when SWR does not exceed 1:3 – there is no change in output power.
But at a greater SWR, the protection gradually lowers the power output, and at SWR = 10 – the output power is only 1%.
================================================== ======================================
EXPANDED RECEIVE CAPABILITIES
The LD-5 can be set to receive 160M and 80M. At this time, this is for receive only, no TX.
1. Put the LD-5 on 40M.
2. Enter Service Menu
3. Use the UP and DOWN arrow keys to bring up (Begin Frequency 2 Band)
4. Using the VFO knob to tune to 1.8MHz. Pressing the Step button will enable faster QSY.
5. Exit Service mode
6. Use the VFO knob to tune to 7.300MHz and as you go higher the VFO will roll over to 1.8MHz.
7. Select a frequency and mode on 160M and store this frequency into a memory location.
8. Tune up to 80M and do the same for a memory location.
9. Tune to 40M and store a memory location.
When the 40M band is selected with the UP and DOWN arrows, use the Memory function to recall 160, 80 or 40M bands.