LNR LD5 DSP-SDR, Краткое руководство пользователя, Страница: 4 / 18

© 2014 LNR Precision Par EndFedz Antennas and QRP Transceivers
over 0-50 deg C
Supply Voltage 10.5V min to 15V max 350Ma receive and 1.5 to 2 A typical in transmit
Push button operation
LO temp. Stability +/- 2.5
Antenna 50 ohms BNC
Dual VFO
Memory 100 memory storage per band Memorize frequency, mode, VFO’s
Built-in speaker 0.2 watts
Dimensions 4.724” long X 3.937” wide x 1.957 “ tall
Weight 19.0oz / 0,54kilogram /excluding microphone/
Iambic key mode A and mode B
Pitch CW Controls CW offset. The sidetone pitch is automatically set to equal the offset
Notch Filter Automatic Heterodyne filter for SSB from -6 to -40 db
Noise reduction level of attenuation of the noise from 1 to 50- use minimal necessary
Noise Blanker
adjusted in the range from value 4 to 12 readings depending on interference
CW VOX Break in delay in CW – adjustable from 0.1 seconds to 5 seconds
CW memory keyer Choose Iambic Mode A or B
VOICE VOX VOX Delay adjustable from 0.1 seconds to 5 seconds
SSB VOX LEVEL VOX GAIN 10-100 10 IS MOST SENSITIVE
Filters
8 different filters – 4 of 4 for CW/ SSB - 1-3 factory presets – No.4 adjustable for CW/50-
1000Hz/ and SSB/250-3.6KHz
Compressor SSB 0-20dB
SSB TX MUTE Enable= no monitor Disable= monitor
Transmitter
Input Power 10.5-13.8 VDC
Output Power 3.5 – 8W