LMI Corporation
Form: CA 183
5/1/2017
R:\Quality\Calibration Instructions\G-WHIZ\CA 183 LMI G-
WHIZ User Guide.doc
Page 35 of 35
4.
When the test is complete, open up MicroRidge’s ComTestSerial program.
5.
Press and hold the middle button on the G-WHIZ for three seconds (until the red LED goes out),
then press the up arrow. This will dump the data into ComTestSerial.
6.
Excluding the zeroes (0.00) in the list, copy and paste this data into an Excel spreadsheet.
7.
With the data still highlighted, click on the INSERT tab in Excel and click on the Insert Line Chart
icon (found within the Charts section of the ribbon bar).
8.
This will create a chart that looks similar to the image below; however, it is important to note that
all differing door models will have different opening profiles.
0
0.02
0.04
0.06
0.08
0.1
0.12
0.14
1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 73
Series1
