LMI Technologies Gocator 2100 Series Скачать руководство пользователя страница 156

Страница: 156 / 523

Gocator Line Profile Sensors - User Manual

Gocator Web Interface • Measurement • 156

Click on the

Output

tab.

For some measurements, only the

Output

tab is displayed.

Enter values in the

Min

and

Max

fields.

Filters

Filters can be applied to measurement values before they are output from the Gocator sensors.

All measurements provide filter settings under the

Output

tab.

Filter

Description

Scale and Offset

The Scale and Offset settings are applied to the measurement value according to the

following formula:

Scale * Value + Offset

Scale

and

Offset

can be used to transform the output without the need to write a script. For

example, to convert the measurement value from millimeters to thousands of an inch, set

Scale

to 39.37. To convert from radius to diameter, set

Scale

to 2.

Hold Last Valid

Holds the last valid value when the measurement is invalid. Measurement is invalid if there

is no valid value.

Smoothing

Applies moving window averaging to reduce random noise in a measurement output. The

averaging window is configured in number of frames.

Hold Last Valid

is enabled, smoothing uses the output of the

Hold Last Valid

filter.

To configure the filters:

Go to the

Measure

page by clicking on the

Measure

icon.

The

scan mode

must be set to the type of measurement you need to configure.

Otherwise, the wrong tools, or no tools, will be listed on the

Measure

page.

In the

Tools

panel, click on a tool in the tool list.

In the measurement list, select a measurement.

To select a measurement, it must be enabled. See

Enabling and Disabling Measurements

on page 158

for instructions on how to enable a measurement.

Содержание Gocator 2100 Series












































































































































































































































































































































































































































































































































Результаты поиска

Содержание Gocator 2100 Series

Отзывы:

LMI Technologies Gocator 2100 Series, Руководство пользователя, Страница: 156 / 523

Результаты поиска

Содержание Gocator 2100 Series

Отзывы: