LMI Technologies Gocator 1100 Series, Руководство пользователя

Страница: 60 / 250

Gocator Web Interface • 60 Gocator 1100 & 1300 Series
Maintenance Panel
S
enSoR
b
ackuPS and
F
actoRy
R
eSet
The Maintenance panel can be used to create sensor backups, restore from a backup, or restore to
factory defaults.
Backup files contain all of the information stored on board a sensor, including configuration and
calibration.
It is recommended that Administrators create a backup file in the unlikely event that a sensor fails and a
replacement sensor is needed. In such an event, the new sensor can be restored with the backup file.
To create a backup:
1
Navigate to the Maintenance panel.
2 ClicktheBackupSensor...button.
3 Whenprompted,specifyalocationtosavethebackup.
The backup will be saved to the specified location on the client computer. Backups are saved as a
single archive that contains all of the files from the sensor.
To restore from a backup:
1
Navigate to the Maintenance panel.
2 Click the Restore Sensor... button.
3
Whenprompted,selectabackupfiletorestore.
The backup file will be uploaded and then used to restore the sensor. Any files that were on the sensor
before the restore operation will be lost.
To restore a sensor to its factory default settings:
1
Navigate to the Maintenance panel.
2 Consider making a backup.
Restoring factory defaults cannot be undone. It is recommended to make a backup before proceeding.
3 Click the Restore to Factory button.
4
Reset the sensor.
After restoring factory defaults, it is necessary to reset the sensor before the changes will take effect.
Use the Reset Sensor button or cycle the power to affect a reset.