LMF Manufacturing HPH, Руководство пользователя

Страница: 5 / 51

HP User Manual
firmware 3.1 Rev.04 IT 5/ 51
2 Wiring the remote terminal
The remote terminal can be installed at max 50m using a 6 poles phone type cable.
Connect the terminal into the A connector of TCONN6J000
TCONN6J000 board
Wiring diagram for a distance up to 50 meters
pLAN setting with remote controller
When the display is ON press together the indicated buttons
Set “Display address setting” to 31 and press
When the display is ON press together the indicated buttons
Press twice
Set as shown the following screen
Then select “Ok?”, set “Yes” and press .
Now the matster board is configured
Display address
Setting..........: 21
I/O Board address: 01
Terminal config
Press ENTER
to continue
P:01 Adr Priv/Shared
Trm1 32 Sh
Trm2 21 Sh
Trm3 None -- Ok?No
max 50 m
Local terminal
Remote terminal
TCONN6J000
J14 and J15 on 2-3
alimentatore
power supply
20…30Vdc – 150mA
_
+
1 2 5 6
address 21
address 32
MASTER SLAVE address 1 address 2
Only size 144-205