LMF Manufacturing HPH, Руководство пользователя

Страница: 42 / 51

HP User Manual
firmware 3.1 Rev.04 IT 42/ 51
24 25
25 26 ANALOG INPUT VALUE 4 SLAVE Compressor 2 suction temp.
26 27 ANALOG INPUT VALUE 5 SLAVE Compressor 2 discharge temp.
27 28 ANALOG INPUT VALUE 6 SLAVE C2 high pressure transducer
28 29 ANALOG INPUT VALUE 7 SLAVE C2 low pressure transducer
29 30
30 31
31 32
32 33
33 34
34 35
35 36
36 37
37 38
38 39
39 40
40 41 Return air Set-point (automatic mode) RoomSetP Room setpoint
41 42 Return air Set-point (summer) RoomSetP_Summer
42 43 Return air set-point (winter) RoomSetP_Winter
43 44 Neutral zone RoomDeadBand
200 201
201 202 Rotor_Speed_Hz
202 203 Rotor_Speed_rps_1 Compressor rotor speed rps [1/10rps]
203 204
Maximum_output_freq
uency_Rps Maximum power+ output frequency set
(Rps)
204 205
Minimum_output_freq
uency_Rps
Minimum drive output frequency (rps)
205 206 Motor_Current Motor current [1/10 A]
206 207 Inverter_Req_0_1000
Speed request to inverter (filtered by
envelop) 0-1000 [1/10%]
207 208
A100_DISCHARGE_SH_
SET_1 SetPoint of Discharge SH (EE Valve
subregulation) [1/10°C]
208 209
A101_DISCHARGE_TEM
P_SET_1 SetPoint of Discharge Temp (EE Valve
subregulation) [1/10°C]
209 210 MOP_Inhibition_Thr_1 to EVD Pin of MOP inhibition threshold
210 211
A107_MOP_THRESHOL
D_FAST_CHANGE_1
211 212
A106_S4_NTC_THERM
AL_TIME_K_1
212 213 Evap_Reg_Setpt_T_1
Evaporating temp. limit Setpoint (Fan
regul. in Pdc) [1/10°C]
213 214 Evap_Reg_Setpt_P_1
Evaporating press.limit Setpoint (Fan
regul. in Pdc) (1/10bar]
214 215 Cond_Reg_Setpt_P_1
Condensing press. limit Setpoint (Fan
regul. in chiller) [1/10bar]
215 216 Cond_Reg_Setpt_T_1
Condensing temp. limit Setpoint (Fan
regul. in chiller) [1/10°C]
216 217
217 218
218 219
219 220
220 221
300 301
301 302 Suction_Temp_A1 Suction temperature - EE valve [1/10°C]