Plug the small end of the supplied power adapter into the DC IN jack at the back of the unit,
plug the adapter body into the standard AC wall socket.
CAUTION:
The unit is designed to operate from a mains supply of AC 120V~60Hz. If the
adapter does not fit properly, turn it over and again. Do not force it.
NOTES:
When the unit is not operated by the AC power or unused for long periods of the time,
please remove the power adapter from the wall outlet and unplug from the main unit.
TO SET THE CLOCK FIRST TIME
This unit is an
AUTOSET
radio alarm clock. The time and date have been preset at the factory.
All you have to do is to plug-in the unit, the current time corresponding to the default time zone
will be displayed.
TO SET THE TIME ZONE
1. Plug in the unit. (The time corresponding to the default time zone will be displayed
alternatively on the display.) The default time zone is set to be time zone No.2 for Eastern
Standard Time (EST).
2. Select the correct time zone based on your geographical area by pressing the + / - button on
the unit to advance time zone number forward / backward till the correct time is displayed.
You can review the displayed time to make sure the correct time zone is selected.
3. Once the correct time zone is displayed, press TIMEZONE/SOURCE button to confirm. The
unit will display the calendar information, followed by the current time to finish the setting.
4. The time zone can be adjusted later manually by holding the "TIMEZONE" button, then
press + / - button to select time zone and press "TIMEZONE" button to confirm.
CONNECTING POWER
7
SETTING THE CLOCK
5 V
DC
NUMBER TIMEZONE
1
Atlantic Standard Time
(AST)
2 (Default)
Eastern Standard Time
(EST)
3
Central Standard Time
(CST)
4
Mountain Standard Time
(MST)
5
Pacific Standard Time
(PST)
6
Yukon Standard Time
(YST)
7
Hawaii Aleutian Standard Time
(HAST)
Remarks: need to adjust manually to Newfoundland Standard Time (NST) from time zone number 1.
