M-12-FS
5
VI- MAINTENANCE:
ALWAYS UNPLUG OR DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE
CLEANING OR SERVICE.
1.- TO ASSURE QUALITY PRODUCT, YOUR KNIFE(18) AND PLATE(19) MUST HAVE SHARP
EDGES, REGULARLY REPLACE OR SEND FOR SHARPENING THESE COMPONENTS.
2.- RELUBRICATE THE NYLON WASHER (15) REGULARLY WITH THE GREASE INCLUDED IN
THE BOTTLE(25) INSPECT AND REPLACE WHEN NO LONGER SERVICEABLE.
NOTE: A SYMPTOM TO RECOGNIZE A WORN NYLON WASHER(15) IS BY TIGHTEN THE
RING TOTALLY WITHOUT OBTAINING PROPER TENSION BETWEEN PLATE(19) AND
KNIFE(18) .
3.- THE GEAR BOX OF THIS GRINDER IS SEALED AND SHOULD BE SERVICED ONLY BY
APPROVED TECHNICIAN, THE TRANSMISSION OIL SHOULD BE CHANGED AT LEAST
EVERY TWO (2) YEARS OF NORMAL OPERATION.
4.- PARTS TO CARE FOR WEARING OUT:
TIME
PARTS TO REVIEW
AND CHANGE
1 MONTH
NYLON WASHER (15)
6 MONTHS
KNIFE (18)
PLATE (19)
2 YEARS
TRANSMISSION OIL
4 –5 YEARS
WORM (16)
HEADSTOCK (13)
NOTE: THE TIME IS AN AVERAGE PERIOD, ITS DEPEND ON THE USAGE.
The kind of oil is SAE 80W90 or equivalent, the quantity is ¾ of liter.
www.linda-lewis.co.uk
0161 696 0052
