LNGS.465213.270-10 OM
Page 18
Fig.4 Landing intercom general view
XP2 connector is meant to connect the landing intercom to CAN bus. Possible indication
of the backlit “CALL” button is
shown in Table 7.
Table 7
Name
Status
Colour
Description
LED inside the
“CALL” button
Lit
Green
CAN bus connection established
Lit
Red
“CALL” button pressed
Flashing
Green/red
A request for establishing voice communication has
registered
Flashing
Green
Voice communication is ON
Flashing
Green/red
No data transfer between the LU and CAN bus
Flashing
Yellow
CAN bus address conflict
Connecting more than 3 landing intercoms to CAN bus requires power supply unit of 24V DC, 2A(min) as output to
power the LU.
LIFT UNIT AND INTERCOM DEVICES OPERATION
A Lift unit is to be connected to the Internet to transmit data to a monitoring center (call center). Either LAN connection
of 10BASE-T/100BASE-T standard or wireless connection via Wi-Fi standard 802.11 b/g/n may be used. Both
connection types can be used simultaneously(see Fig. 5).
