LK Floor Heating | Assembly Instructions | LK Room Temperature Control ICS-RF8
19
EN.33.C.891008
The external sensor, LK External Sensor ICS is connected as follows:
1. The external sensor is installed in a protective conduit; see separate instructions in the
External sensor
– location in different heating systems
section.
2. Connect the sensor to the terminal on the thermostat back-plate, the terminal is marked EXT.SENSOR.
3. Select the function the sensor is to perform, follow the instructions in the
External Sensors - select
function
section.
External sensors - select function
It is possible to specify a function for the thermostat when connecting to external sensors.
The setting is made as follows:
1.
Press
Mode
until
flashes, confirm with
Mode
.
2. Press the right arrow until
SENM
(Sensor Mode) is shown in display, confirm with
Mode
.
3. The display shows
SEN
and the icon on the left flashes.
Select from the following modes: