5 (9)
Manual connection
1. Use a smartphone or computer to connect to
the wireless access point of the water safety
system. This is named CubicSecure_XXXX.
2. Open a web browser and go to
cubicsecure.net (or 10.123.45.1)
3. Select your wireless network and enter the
password in the box displayed.
4. Press ADD followed by CONFIRM, then
wait until the CONNECT LED shines solid
WHITE.
PAIRING
Example cabinet with pairing
NOTE!
In the event of apartment installation, units
should be installed on hot and cold water
pipes to protect against any leakage and
avoid possible scalding.
Manual pairing
1. Install and start the units. One for hot water
and one for cold water.
2. Hold down the CONNECT button for five
seconds on the unit installed for cold water.
The CONNECT LED starts flashing YEL-
LOW and BLUE.
3. Hold down the CONNECT button for five
seconds on the unit installed for hot water.
The CONNECT LED starts flashing YEL-
LOW and RED.
10. Give the water safety system a name and
select the correct setting for the water.
Confirm your selection by pressing ADD
DEVICE.
Selecting the name and add-on for the unit.
The LK app
All installed units are displayed in the LK app.
Summary screen - DEVICES.
EN.40.C.12.2021-12-06
