Livpure Envy, Руководство пользователя

Страница: 12 / 24

11
Installation Instructions
Installation procedure :
• Please install on the wall if required with the help of two 10x50 self taping screws (supplied with the unit) on a
horizontal level.
• Allow water to Flush/Drain from all filters by removing the outlet pipe of each filter.
• While flushing filters kindly ensure water is not spilled on to any Electrical/Electronic part to avoid failure. If so then
switch OFF the Mains and soak the water with the help of a cloth from Electrical/Electronic Part and allow it to dry.
• Check for any leakage from piping & fittings/loose fittings. If any pipe is found loose then reinsert it into the connector
to avoid leakage later.
Starting up the purifier :
• Switch ON the power supply.
• Wait approximately for 45 mins so that storage tank gets fully filled.
• Switch OFF the power supply.
• Drain the storage tank so as to remove any dust particles present in the pipes and storage tank.