Livox Horizon
Quick Start Guide
5
Mounting the Livox Horizon with Self-Dissipation Module
Refer to the dimensions and the mounting holes in the diagram below to mount or embed
the Livox Horizon to or in an appropriate place on the target base. When the self-dissipation
module is attached to the Livox Horizon, the Livox Horizon can be mounted on the target
base using M3 screws or outfitted with ¼ inch mounting holes.
Unit: mm
37.0
1/4-20 UNC
115.0
71.6
22.0
27.0
56.0 27.0
15.4
66.5
50.1
4-M3 6
37.5
7.0
63.0
35.5
60.00
4.0
+0.05
0
+0.1
0
2
4.0
6.0
6-M3 6
50.1
77.0
84.1
To remove the self-dissipation module, make sure the bottom of the Livox Horizon is facing
upward, and then remove the seven M2 screws using the hex screwdriver included.
Detach the self-dissipation module. Make sure the connectors on the bottom of the Livox
Horizon and the self-dissipation module are aligned, and secure the self-dissipation
module using seven black M2 screws. When the self-dissipation module is detached,
make sure to attach the provided rubber seal to the fan connector on the bottom of the
Livox Horizon to prevent liquids or dust from coming into contact with the Livox Horizon.
