Instruction Manual
9
1.
Open the drain switch to drain out the water from the cooling cavity into the drip tray. Make sure
the drip tray is well set into the notch to avoid any water flowing out on table or surface.
Important: the drip tray can load 450ml water. So you need to repeat the operation twice.
2.
After all water drain out, close the drain switch and put 800ml fresh water into the cavity.
ACCESSORIES INCLUDED WITH YOUR BEER COOLER
No. Name
Qty.
Picture
1
Beer tube
2
2
Heineken adaptor
3
3
Cleaning bottle
1
CLEANING AND STORAGE
The beer cooler requires clean before the first use or if not used for long time.
Clean the whole machine with dry cloth. Otherwise two cleaning way is recommend as following
-
Load warm water into the cleaning bottle.
-
Connect the end of piercing pin, press the water into the pin to clean the pin tube and push the
water out from the beer tube at the other end.
-
Repeat these cleaning steps until the beer tube is cleaned. It needs 3 bottles warm water at least.
Never put the tap mechanism parts in the washing machine or dishwasher.
Never use the chemical cleaning detergent to clean the parts, warm or purified water is recommended.
